Description How to apply a UV Transfer sticker 1. Prep the Surface & Pre-Squeegee Clean the surface with soap and water or a 50/50 rubbing alcohol mix to help the sticker last longer.Place the cut sticker face down (white side up) and firmly squeegee the entire design 2–4 times, especially on thin or small details. 2. Separate the Clear Sheet Make a small tear away from the design and slowly peel the clear sheet off the white backing.Watch closely to ensure all parts lift. If something stays behind, re-squeegee and peel again from a different angle. 3. Apply the Sticker Position your sticker on the item.For small designs, place carefully with both hands.For larger designs, lay it down from one side to the other to avoid bubbles or wrinkles. 4. Finish the Transfer Squeegee firmly 2–4 times. Peel the clear sheet slowly while watching to make sure every part sticks.If anything lifts, press it back down, re-squeegee, and peel again from another angle.
